Maru dai completed, now I have three!

It feels like such a long time since I last posted when it has really only been a couple of weeks. I took a week long hiatus from doing any craft type activities for a couple of reasons. First, my wrist was hurting and I thought a rest would be good for it. Second, I just started a new job and wanted to focus my energy on work.

Now it is almost time for school to start again. For me that means back to the woodshop and starting a new project. In order to be ready for new things it is time to finish off the old things. This week I finally finished these maru dai (stands to use for making kumihimo cord). I have been using them in their unfinished state and they worked fine, but it is good to have them done.

I chose three different heights as an experiment to see how it would feel to work with different sizes. The shortest one has 12 inch posts. It is convenient to use when sitting although I do have to tie up the cord coming out the bottom more frequently. The middle one has 17 inch posts. It was the first stand I made so the one I have used the most. It is not convenient to use with the tables I have at home but it is a good height when I set it on a low stool or when I am standing. The third stand is 24 inches high and is my favorite. It sits on the floor when I am sitting to weave or on a coffee table if I want to stand. Because it is tall I don't have to worry as much about tying up the cord. The drawbacks are that it takes up more space to store and was expensive to make, especially because I used walnut.

The tall and short stands are walnut and the middle height stand is red oak. The walnut is so beautiful but so much more expensive than other woods. I probably spent over $30 just for the wood in the tall stand and $18 for the short one. The oak was about half as expensive. I used a gel stain on all the wood, rubbed in by hand. This went on much better and more controlled than the liquid stain although it was harder to find a store that carried it. The walnut is stained with a dark walnut stain, the oak with a color called "Provincial" (a light-medium golden brown). All the stands are finished with multiple coats of Mylands wax, a blend of beeswax, carnuaba wax and other stuff not mentioned on the label. The wax gives a nice low sheen and doesn't make to wood too slick and cause the threads to slide around too much when in use.

Each time I make something new in wood I learn a new lesson. This time the lesson was: don't skimp on sanding with the low grit sandpaper to get the big scratches and flaws out. The finer grade sandpaper won't do it the flaws really show up when the piece is finished.

Maru dai bobbins

Work continues on my maru dai stand. I really wanted to make some bobbins for it so I could start using it even though I haven't finished sanding or gluing. First I tried the bobbins that look like spools but on those the thread is kept from unwinding by tying a certain kind of knot and I wasn't very good at that. My bobbins kept unwinding and it was giving me sour face.

Next I started on a version of bobbin I found in the book which is my primary source so far, The Big Book of Sling and Rope Braids by Rodrick Owen (ISBN-10: 0304348252, ISBN-13: 978-0304348251). I have used that book alone to teach myself braiding and so far, so good. This next bobbin was problematic; the corkscrew of wire that is inserted in the top of the dowel was hard to twist and impossible to make look nice and even. Then, I had an epiphany! I dug into my picture hanging kit box and took some brass loops, the kind that screw into the back of the picture frame that the picture hanging wire fastens to. The ends were pointed and threaded like wood screws (since they are supposed to be screwed into picture frame backs, go figure) so they went into the ends of my dowels really well (pilot holes helped!). Then I took a pair of pliers and pried the loop open so thread could fit in the loop and voila! it worked perfectly and looked attractive. I only made six since that is how many wooden discs I had so I photographed the stand with a sample four strand braid. It is sitting amongst the lavender in my newly renovated front yard.

Note in the picture that I used metal washers as counterweights; they are a little difficult to see in this picture. I liked them because I could vary the weight on the counterweight, also they fit perfectly on the 3/8" dowel so I can vary the weight (and thus tension) on the bobbins.

My first attempt at a maru dai and kumihimo

I started taking a woodworking class though the local adult education and I am hooked! For my first project I made a kumihimo braiding stand called a maru dai. Although is it not finished yet I wanted to try it out to make sure the dimensions were good. I liked it a lot and now I will finish it. I tried this type of braiding once before using a quickie cardboard contraption but the wood stand is much nicer to use.

I made a simple four strand braid for my first attempt and it turned out pretty well. The thread is some silk my friend Renee gave me. She dyed it using indigo and tumeric. I also have to work out a better system for the bobbins and counterweight. I don't like tying a slip knot around the bobbin and for the counterweight I used a spool of solder and some wire my boyfriend was using that happened to be handy. I'll post another picture when I have that worked out.